Factory Directly Sliver Making Machine - YX1312 Auto-leveller Draw Frame – Yisun

Specifications

Suitable fiber length: 22–76mm
No. of deliveries: 2
Delivery speed: 2.47-10m/s(200-600m/min)
Drafting type: 3 over 3 with pressure bar and guideroller
Total draft: 5.6-8.7(4-11 Optional)
Loading type: Pendulum arm spring weighting or optional Pneumatic pressure device
Cleaning type: Revolving cloth loading top roller for upper cleaning.Single apron traverse wiping roller for bottom cleaning. Fly is sucked into hopper through suction inlet.
No. of feeding ends: 6–8
Can size(mm):
Feeding can Dia: Ф400 Ф500 Ф600
Ф900 Ф1000
height: 1100(900)
Delivery can Dia: Ф350 Ф400 Ф500
height:100(900)
Feeding type: Wing overhanging type positive feeding. The Slivers passthrough condenser and after being detected by T&G roll, are fed into main draft zone.
Can change type: Individual motor drives chain and push rod.Feeding empty can while pushing out full can.
Motors: Main motor:Y132S2-2-B57.5KW,2900r/min
Can change motor:FW11-6D2/T30.25KW, 910r/min
Suction fan motor:FX90L2-2,1.5KW,2850r/min
Cleaning motor:AJC5638-280,22r/min
Servo motor: AKM44S-SSC2R-021.64KW
Power: 3-phase A.C,380V/50HZ or 440V/60HZ
Mode of drive: High speed gears in oil-bath.The driving systems Between secondroller and guide roller are Driven by Timing belt. And guide rollers are driven by flat belts
Control system: The speed of main motor is controlled by inverter, PLC is adopted for controlling system Auto stop motion: Photoelectric stop and micro switch stop motion
Overall dimensions(mm):
2060 x 800 X1595 (for 900mm height cans)
2060 x 800 X1795 (for 1100mm height cans)
Weight of main machine: Approx.2000Kg